The catalogue, range by range
One backbone — dimmable drivers, mesh connectivity, solar options — declined for every use.
Roads & urban axes
Three sizes — LOTUS1, LOTUS2, LOTUS3 — cover 20 to 200 W with the same MIRO-SILVER dark-light optic (ρ ≥ 98 %, ULOR 0 %) and an under-driven LUSSO 7070 ceramic LED. Replacing a 250 W HPS, LOTUS 100 W + LiDAR cuts consumption from 1,155 to 180 kWh/yr — −84 %. Autonomous solar version with MPPT and storage: same head, two energies.
Drag to compare the optics
| Range | LOTUS1 120–200 W · LOTUS2 60–110 W · LOTUS3 20–50 W |
| Optic | MIRO-SILVER dark-light G*6 · ULOR 0 % · ρ ≥ 98 % |
| Efficacy | Up to 137 lm/W luminaire · driver > 94 % |
| Colours | 1800–5000 K · CRI 70/80/90 · Tunable White 2200–6500 K |
| Lifetime | ≥ 100,000 h L90B10 · tool-free LED, driver, SPD replacement |
| Supply | Mains 200–240 V · ENEC driver · DALI D4i + DT8 |
| Protection | IP66 · IK09 · Class II · ta 50 °C (TÜV SÜD) · optional 20 kV SPD |
| Detection | LiDAR 100 m ±5 cm (LD option) · −40 to −70 % energy |
| Range | LOTUS1 120–200 W · LOTUS2 60–110 W · LOTUS3 20–50 W |
| Energy | Photovoltaic panel + MPPT regulation · optional V2G |
| Autonomy | Multi-night battery, sized to the site's solar resource |
| Optic | MIRO-SILVER dark-light G*6 · ULOR 0 % · ρ ≥ 98 % |
| Efficacy | Up to 137 lm/W luminaire |
| Protection | IP66 · IK09 · Class II · ta 50 °C (TÜV SÜD) |
| Detection | LiDAR 100 m ±5 cm (LD option) · adaptive dimming |
| Control | LidarMesh · TALQ 2.7.1 · DALI D4i |
Catalogues and one-pagers in the site’s docs/ folder · LM-79 / EN 13032 photometric campaign, Rev. 08/2026.
Modular floodlights
Built for sports grounds and large areas: aimable modular optic blocks, instant switch-on for “event” scenarios, and module-by-module replacement instead of the whole floodlight.
| Architecture | Replaceable optic modules |
| Beams | Narrow to wide, controlled glare |
| Use | Pitches, esplanades, high-mast relamping |
| Control | Groups and scenarios via LidarMesh |
| Mounting | Existing poles and towers |
Parks, paths & estates
LED lantern on a 3 m aluminium pole for spaces where light should accompany, not dominate: warm colour temperature, deep standby dimming, and a solar version for off-grid sites.
| Power | 60 W, dimmable down to 10 % standby |
| Pole | 3 m aluminium, concrete base or plate |
| Protection | IP66 · IK09 · Class II |
| Ambience | Soft optic, low intrusive light |
| Option | Autonomous solar kit |
Industrial zones & docks
High-power floodlight for logistics yards, loading docks and truck parks: high, constant output, reinforced mechanics, and dimming tied to vehicle detection.
| Power | 600 W, high output |
| Use | Docks, yards, large car parks |
| Ruggedness | Aluminium body, high IK |
| Control | Zones and schedules via LidarMesh |
| Detection | Vehicles and machinery (LiDAR) |
Solar lighting
Panel, MPPT regulation and battery built into the pole: lighting installs with no trenching or grid connection, from rural tracks to new estates — with V2G re-injection of the surplus where a grid exists.
| Energy | Photovoltaic panel + MPPT regulation |
| Storage | Battery sized for several nights |
| Installation | No trenching, no grid connection |
| Management | Adaptive dimming on LiDAR detection |
| Control | LidarMesh · optional V2G re-injection |
Smart lighting control
Make a new or existing network smart: our nodes mount on the Zhaga or NEMA socket of market luminaires, report energy and faults, and the LidarMesh platform orchestrates scenarios and maintenance.
| Protocol | TALQ 2.7.1 · open API |
| Luminaire | DALI D4i · Zhaga / NEMA socket |
| Network | Radio mesh · multi-district gateways |
| Data | Energy, hours, driver drift, alerts |
| Hosting | D-SLS Cloud Infrastructure, EU redundancy |
LED kits for artisan lighting
Medinas, historic centres, wrought-iron art lanterns: our LED kits replace the source inside the original fitting — the lantern stays, the light changes. Warm white, deep dimming, optional remote management.
| Principle | LED module + compact driver inside the existing body |
| Colour | Warm white 2200–2700 K, low glare |
| Compatibility | Lanterns, candelabras, art wall fittings |
| Dimming | Down to 10 % night standby |
| Option | LidarMesh node built into the kit |
Other & custom
Decorative light columns, brackets and supports, OEM adaptations or needs that fit no box: our design office starts from your specification and industrialises the answer.
| Columns | D-SLS-41 / D-SLS-20 decorative range |
| Accessories | Brackets, consoles, plates, bases |
| OEM | Our drivers and nodes integrated into your products |
| Studies | Photometry and mechanics to specification |
| Path | Validated prototype, then series |